History

« Previous - Version 25/35 (diff) - Next » - Current version
Adrian Georgescu, 04/26/2010 08:10 am

= Testing =

<acronym title="Installation,Configuration,Testing, depth=2">TOC</acronym>

Test Suite

A test suite for testing the functionality the server is located in /xcap/test directory. If the software has been installed as a Debian package, the test suite is found in /usr/lib/python2.5/site-packages/xcap/test

To run the test suite, configure the credentials of a test account and the xcap root in a configuration file as follows:

{{{
~/.xcapclient.ini
}}}

{{{
[Account_test]
sip_address=alice@example.com
password=123
xcap_root = http://xcap.example.com/xcap-root
}}}

Replace the xcap_root with the same xcap_root configured in the server and make sure the hostname points to the IP address where the server listens to.

Add the same test account to the OpenSIPS subscriber table:

{{{
INSERT INTO `subscriber` (username,domain,password,email_address,ha1, ha1b)
VALUES
('alice','example.com','1234','alice@example.com',
'fd7cab2287702c763e7b318b7fb2451a',
'fe605f5cea371c874a6fb7239a332a3e');
}}}

Then run the test suite:

{{{
~/openxcap/xcap/test$./test.py
test_delete (test_attribute.AttributeTest) ... ok
test_get (test_attribute.AttributeTest) ... WARNING: test with URI in att_value is disabled
ok
test_put (test_attribute.AttributeTest) ... ok
test_global_auth (test_auth.AuthTest_org_openmobilealliance_pres_rules) ... ok
test_users_auth (test_auth.AuthTest_org_openmobilealliance_pres_rules) ... ok
test_global_auth (test_auth.AuthTest_pidf_manipulation) ... ok
test_users_auth (test_auth.AuthTest_pidf_manipulation) ... ok
test_global_auth (test_auth.AuthTest_pres_rules) ... ok
test_users_auth (test_auth.AuthTest_pres_rules) ... ok
test_global_auth (test_auth.AuthTest_resource_lists) ... ok
test_users_auth (test_auth.AuthTest_resource_lists) ... ok
test_global_auth (test_auth.AuthTest_rls_services) ... ok
test_users_auth (test_auth.AuthTest_rls_services) ... ok
test_global_auth (test_auth.AuthTest_test_app) ... ok
test_users_auth (test_auth.AuthTest_test_app) ... ok
test_global_auth (test_auth.AuthTest_watchers) ... ok
test_users_auth (test_auth.AuthTest_watchers) ... ok
test_global_auth (test_auth.AuthTest_xcap_caps) ... ok
test_users_auth (test_auth.AuthTest_xcap_caps) ... ok
test_delete (test_element.ElementTest) ... ok
test_get (test_element.ElementTest) ... WARNING: test with URI in att_value is disabled
ok
test_put_error (test_element.ElementTest) ... ok
Testing different ways of inserting an element as described in examples from Section 8.2.3 ... ok
Testing PUT requests of form '*[@att="some"]' which require looking into body of PUT ... ok
test_replacement (test_element_put.PutElementTest) ... ok
test400_1 (test_errors.ErrorsTest) ... ok
test400_2 (test_errors.ErrorsTest) ... ok
test404 (test_errors.ErrorsTest) ... ok
test405 (test_errors.ErrorsTest) ... ok
test409 (test_errors.ErrorsTest) ... ok
test_gibberish (test_errors.ErrorsTest) ... ok
test_conditional_GET (test_etags.ETagTest) ... ok
test_conditional_PUT (test_etags.ETagTest) ... ok
test_conditional_GET (test_etags.ETagTest2) ... ok
test_conditional_PUT (test_etags.ETagTest2) ... ok
test_etag_parsing (test_etags.ETagTest2) ... ok
test_errors (test_fragment.FragmentTest) ... ok
test_success (test_fragment.FragmentTest) ... ok
test_has_global (test_global.TestGlobal) ... ok
test_no_global (test_global.TestGlobal) ... ok
test_ns_bindings (test_nsbindings.NSBindingsTest) ... ok
test_pidf_manipulation (test_pidf.PIDFTest) ... ok
test_pidf_manipulation (test_presrules.PresenceRulesTest) ... ok
test_operations1 (test_resourcelists.DocumentTest) ... ok
test_operations2 (test_resourcelists.DocumentTest) ... ok
test_operations3 (test_resourcelists.DocumentTest) ... ok
test_operations4 (test_resourcelists.DocumentTest) ... ok
test_operations1 (test_rlsservices.DocumentTest) ... ok
test_operations2 (test_rlsservices.DocumentTest) ... ok
test_operations3 (test_rlsservices.DocumentTest) ... ok
test_operations4 (test_rlsservices.DocumentTest) ... ok
test_get (test_watchers.Test) ... ok
test_schema (test_xcap_caps.XCAPCaps) ... ok

----------------------------------------------------------------------
Ran 53 tests in 48.941s

OK
}}}

=== Notes ===

  • Running the test suite for a given user will result in the destruction of all xcap documents belonging to that user
  • Replacing 'test.py' with 'test_something.py' will run only the tests defined in test_something.py
xcapclient

A command line client is available part of python-xcaplib, which is available as a tar archive and Debian package.

The client can be used to manipulate full or partial XML
documents on XCAP servers (not limited to OpenXCAP) and has a bash shell
command line completion facility that makes it very easy to browse through
the structure of XML documents based on XPATH.

First create xcapclient configuration file:

{{{
~/.xcapclient.ini
}}}

with your credentials and XCAP root.

{{{
[Account]
sip_address=alice@example.com
password=123
xcap_root = https://xcap.example.com/xcap-root
}}}

Operating on XCAP documents (full document handling)

In the examples folder there are sample XCAP XML documents used for the examples below:

=== PUT ===

To a document, for example, presence rules:

{{{
xcapclient -i pres-rules.xml put
}}}

On success, the command prints '201 Created' if a new document was created on the server or '200 OK' if an existing document was replaced. You should something like this:

{{{
url: http://xcap.example.com/xcap-root/resource-lists/users/alice@example.com/index.xml
201 Created
etag: "856bdac9012ee28e46cebb81e51ac2a0"
}}}

=== GET ===

{{{
xcapclient --app resource-lists get
}}}

or

{{{
xcapclient --app pres-rules get
}}}

or

{{{
xcapclient --app rls-services get
}}}

This will print the document you've just put, along with its tag.

or

{{{
xcapclient --app xcap-caps get
}}}

will print the capabilities of the XCAP server.

=== DELETE ===

{{{
xcapclient --app resource-lists delete
}}}

and

{{{
xcapclient --app pres-rules delete
}}}

and

{{{
xcapclient --app rls-services delete
}}}

Operating on XML elements (partial document handling)

It is possible to retrieve a single element in XCAP document, to replace it, to insert a new one or to remove one. To address an element, a node selector is required, which is an XPATH-like expression, defined in http://tools.ietf.org/html/rfc4825#section-6.3.

Let's put the document in section 1 again to server, so we can fetch some elements from it.

{{{
xcapclient --app resource-lists get '/resource-lists/list[@name="friends"]/entry1/display-name'
}}}

{{{
etag: "856bdac9012ee28e46cebb81e51ac2a0"
<display-name>Bill Doe</display-name>
}}}

Specifying application with --app, is no longer necessary as it may be guessed from the node selector.

To replace an element, use the node selector you would have used for [http://zolpo.com/ Insurance Quotes] retrieving the element but do PUT instead. For example if we want to fix Bill's display name:

{{{
xcapclient -i bill_display_name_fixed.xml put '/resource-lists/list[@name="friends"]/entry1/display-name'
}}}

To insert a new element one must construct a node selector that doesn't point to an existing element.

{{{
xcapclient -i alice.xml put '/resource-lists/list[@name="friends"]/entry1[@uri="sip:alice@example.com"]'
}}}

{{{
201 Created
etag: "bfbd38bed7163dd19e6e110d0dfa0876"
}}}

This will shift Bill's entry to the second position.

See README of python-xcaplib package for more detailed examples on how to create/retrieve XCAP documents.

SIP SIMPLE client SDK

You can download the command Line Tools for SIP SIMPLE client SDK from http://SipSimpleClient.com

Create an account:

{{{
sip-settings -a add user@domain
}}}

Set the newly created account as default:

{{{
sip-settings -a default user@domain
}}}

Set the xcap root:

{{{
sip-settings -a set xcap.xcap_root=http://xcap.example.com/xcap-root/
sip-settings -a set xcap.enabled=True
}}}

The following Command Line Tools are available for testing XCAP: